EPDM diaphragmEPDM rubber is a synthetic rubber and is widely used. Its main characteristic is that it is relatively affected by temperature and ozone.Small, and excellent aging resistance.FeaturesEPDM is especially suitable for hot water, cold water, alkaline medium and non-concentrated acids. Suit

How to replace the diaphragm of manual diaphragm valve?

FKM diaphragmFKM is the abbreviation of fluorine rubber. Fluorine rubber is heat-resistant and chemical-resistant, and its quality is higher than that of nitrile rubber, so it is also more expensive. Wide range of applications. Fluoroelastomer has high chemical resistance, so compared with EPDM diap

1. Insert the air supply pipe into the air inlet of the pneumatic actuator, and let in the compressed air of 6bar;2. Remove the valve body with four sets of screws;3. Turn off the air source and discharge the compressed air;4. Rotate counterclockwise to remove the old diaphragm;5. Install a new diap

There are three types of CNYC diaphragms:ItempicturesFeatures and ApplicationsEPDM diaphragmsVery flexible and suitable for hygienic processes.FKM diaphragmsIt is resistant to high temperature and chemical corrosion, and has a wider range of applications than EPDM diaphragms.PTFE diaph

Features of Diaphragm ValvesDiaphragm valves have the following features:With adjustable limit deviceVisual position indication of switch statusVarious surface finishesNo dead endsBody material 316LThe valve body sealing weir groove adopts spherical structure Advantages of Diaphragm ValvesDiaphragm

1. After the valve is used for a period of time, the diaphragm is not damaged, and when the valve leaks, turn the handle clockwise to close the valve;2. After closing the valve, slightly open the valve, remove the handle, and turn the limit nut counterclockwise half a turn;3. Install the handle, tur